{
 "currentVersion": 10.81,
 "cimVersion": "2.6.0",
 "serviceDescription": "This layer is one of two that depict trout and salmon inland stream regulation types for the State of Michigan for April 1, 2025 \u2013 March 31, 2026. The types represented in the two layers are as follows: types 1-4, gear restricted (GR), research area (RA), and brook trout restoration areas (BTRA). This layer specifically depicts the majority of streams listed as types for inland stream trout and salmon regulations. These boundaries are based on Michigan Department of Natural Resources (DNR) Fisheries Order 200 (FO-200) and Fisheries Order 210 (FO-210). See FO-200, FO-210, and the Michigan Fishing Guide for more details. <div><br /><\/div><div>Features from the 1:24,000 scale National Hydrography Dataset (NHD) were used to depict inland stream trout and salmon type regulations. NHD features were altered to fit the extent of the regulations described in FO 200 and FO 210. Except for streams in the Michigan-Wisconsin Boundary Waters, any other inland stream not classified by type (1-4; GR, RA, BTRA) are still subject to trout and salmon fishing regulations as described on page 40 of the Michigan Fishing Guide. Please see pp. 24-25 for Michigan-Wisconsin Boundary Waters regulations. Note that the two inland stream trout and salmon regulation GIS layers only show the streams classified by type; these layers do not include any streams that are not classified by type. The regulation type associated with a stream feature is indicated in the RegulationType field and the designation status is indicated in the Designated field (with 0 as non-designated and 1 as designated). The RegulationType and Designated field are concatenated in the RegTypeDes to show the full type regulation and designation status. In some cases, a stream will have more than one regulation type assigned. In which case, the RegulationType field will have both types listed, as will the RegTypeDes field. Each regulation type is associated with specific rules for the length of the fishing and possession seasons, minimum size limits, and daily possession limits. See FO 200 and the Michigan Fishing Guide for more details about the individual regulation types. Regulation types are as follows: Type 1 \u2013 Type 1 Trout Stream; Type 2 - Type 2 Trout Stream; Type 3 - Type 3 Trout Stream; Type 4 - Type 4 Trout Stream; BTRA \u2013 Brook Trout Restoration Area; RA - Research Area Trout Stream; GR - Gear Restricted Stream. Designation status is either designated or non-designated. Designated trout streams are inland streams containing a significant population of trout or salmon, as identified by the State of Michigan. Designated trout streams are protected from certain activities, see the Michigan Fishing Guide or FO 210 for more details. All Type 1, Type 2, GR, RA, and BTRA are designated trout streams. Most Type 3 and Type 4 streams are designated trout streams. The main layer shows the majority of inland streams that are classified by type for trout and salmon regulations. However, there are some polygon features that cannot be displayed in this line layer and are represented in the BTRA polygon layer. To show all inland streams that are classified by type for trout and salmon regulations, both layers must be displayed in the proper order using established symbology. The BTRA polygon layer should be displayed on the top of the main stream regulations layer. When displaying the inland trout and salmon streams with inland trout and salmon lakes Types A-F &amp; Special Type, both of the stream layers should be displayed underneath the Types A-F &amp; Special Type layer. For the main regulation type layer, set the drawing order so that specific regulations type display on top of others. Do this by opening the feature class properties in the Table of Contents in ArcMap, then go to Symbology, then Advanced, then Symbol levels and using the following order, from top to bottom: Type 4 Non Designated, Type 3 Non Designated, GR Type 4 Designated, GR Type 2 Designated, GR Type 1 Designated, GR Designated, RA Designated, Type 4 Designated, Type 4 BTRA Designated, Type 3 Designated, Type 3 BRTA Designated, Type 2 Designated, Type 1 Designated, and Type 1 BTRA Designated. GIS layer was last updated 3/13/2025. Metadata record last updated 3/27/2025. <br /><\/div>",
 "mapName": "mi_reg_troutstream",
 "description": "This layer is one of two that depict trout and salmon inland stream regulation types for the State of Michigan for April 1, 2025 \u2013 March 31, 2026. The types represented in the two layers are as follows: types 1-4, gear restricted (GR), research area (RA), and brook trout restoration areas (BTRA). This layer specifically depicts the majority of streams listed as types for inland stream trout and salmon regulations. These boundaries are based on Michigan Department of Natural Resources (DNR) Fisheries Order 200 (FO-200) and Fisheries Order 210 (FO-210). See FO-200, FO-210, and the Michigan Fishing Guide for more details. Features from the 1:24,000 scale National Hydrography Dataset (NHD) were used to depict inland stream trout and salmon type regulations. NHD features were altered to fit the extent of the regulations described in FO 200 and FO 210. Except for streams in the Michigan-Wisconsin Boundary Waters, any other inland stream not classified by type (1-4; GR, RA, BTRA) are still subject to trout and salmon fishing regulations as described on page 40 of the Michigan Fishing Guide. Please see pp. 24-25 for Michigan-Wisconsin Boundary Waters regulations. Note that the two inland stream trout and salmon regulation GIS layers only show the streams classified by type; these layers do not include any streams that are not classified by type. The regulation type associated with a stream feature is indicated in the RegulationType field and the designation status is indicated in the Designated field (with 0 as non-designated and 1 as designated). The RegulationType and Designated field are concatenated in the RegTypeDes to show the full type regulation and designation status. In some cases, a stream will have more than one regulation type assigned. In which case, the RegulationType field will have both types listed, as will the RegTypeDes field. Each regulation type is associated with specific rules for the length of the fishing and possession seasons, minimum size limits, and daily possession limits. See FO 200 and the Michigan Fishing Guide for more details about the individual regulation types. Regulation types are as follows: Type 1 \u2013 Type 1 Trout Stream; Type 2 - Type 2 Trout Stream; Type 3 - Type 3 Trout Stream; Type 4 - Type 4 Trout Stream; BTRA \u2013 Brook Trout Restoration Area; RA - Research Area Trout Stream; GR - Gear Restricted Stream. Designation status is either designated or non-designated. Designated trout streams are inland streams containing a significant population of trout or salmon, as identified by the State of Michigan. Designated trout streams are protected from certain activities, see the Michigan Fishing Guide or FO 210 for more details. All Type 1, Type 2, GR, RA, and BTRA are designated trout streams. Most Type 3 and Type 4 streams are designated trout streams. The main layer shows the majority of inland streams that are classified by type for trout and salmon regulations. However, there are some polygon features that cannot be displayed in this line layer and are represented in the BTRA polygon layer. To show all inland streams that are classified by type for trout and salmon regulations, both layers must be displayed in the proper order using established symbology. The BTRA polygon layer should be displayed on the top of the main stream regulations layer. When displaying the inland trout and salmon streams with inland trout and salmon lakes Types A-F &amp; Special Type, both of the stream layers should be displayed underneath the Types A-F &amp; Special Type layer. For the main regulation type layer, set the drawing order so that specific regulations type display on top of others. Do this by opening the feature class properties in the Table of Contents in ArcMap, then go to Symbology, then Advanced, then Symbol levels and using the following order, from top to bottom: Type 4 Non Designated, Type 3 Non Designated, GR Type 4 Designated, GR Type 2 Designated, GR Type 1 Designated, GR Designated, RA Designated, Type 4 Designated, Type 4 BTRA Designated, Type 3 Designated, Type 3 BRTA Designated, Type 2 Designated, Type 1 Designated, and Type 1 BTRA Designated. GIS layer was last updated 3/13/2025. Metadata record last updated 3/27/2025. ",
 "copyrightText": "Data prepared by Institute for Fisheries Research, Michigan Department of Natural Resources and School of Natural Resources, University of Michigan",
 "supportsDynamicLayers": true,
 "layers": [
  {
   "id": 0,
   "name": "Trout Stream Regulation 2025",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 9027.977411,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline",
   "supportsDynamicLegends": true
  },
  {
   "id": 1,
   "name": "Trout Stream BTRA Regulation 2025",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon",
   "supportsDynamicLegends": true
  }
 ],
 "tables": [],
 "spatialReference": {
  "wkid": 102100,
  "latestWkid": 3857,
  "xyTolerance": 0.001,
  "zTolerance": 0.001,
  "mTolerance": 0.001,
  "falseX": -20037700,
  "falseY": -30241100,
  "xyUnits": 1.4892314192838538E8,
  "falseZ": -100000,
  "zUnits": 10000,
  "falseM": -100000,
  "mUnits": 10000
 },
 "singleFusedMapCache": false,
 "initialExtent": {
  "xmin": -9615988.637043322,
  "ymin": 5372569.328627739,
  "xmax": -9606507.027344814,
  "ymax": 5380944.578197848,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857,
   "xyTolerance": 0.001,
   "zTolerance": 0.001,
   "mTolerance": 0.001,
   "falseX": -20037700,
   "falseY": -30241100,
   "xyUnits": 1.4892314192838538E8,
   "falseZ": -100000,
   "zUnits": 10000,
   "falseM": -100000,
   "mUnits": 10000
  }
 },
 "fullExtent": {
  "xmin": -1.00635306376E7,
  "ymin": 5124972.503399998,
  "xmax": -9174878.5069,
  "ymax": 6019342.587099999,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857,
   "xyTolerance": 0.001,
   "zTolerance": 0.001,
   "mTolerance": 0.001,
   "falseX": -20037700,
   "falseY": -30241100,
   "xyUnits": 1.4892314192838538E8,
   "falseZ": -100000,
   "zUnits": 10000,
   "falseM": -100000,
   "mUnits": 10000
  }
 },
 "minScale": 0,
 "maxScale": 0,
 "units": "esriMeters",
 "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP",
 "documentInfo": {
  "Title": "mi-ags-maps.aprx",
  "Author": "",
  "Comments": "2014 Michigan Trout Stream Regulations.  The data is digitized based on Michigan Fisheries Order 210 (2014).",
  "Subject": "Michigan Trout Stream Regulations with information of Trout Stream Types  and Designatied Trout Streams.",
  "Category": "",
  "AntialiasingMode": "Fast",
  "TextAntialiasingMode": "Force",
  "Keywords": "Trout Stream,Regulation,Designated Trout Stream,Michigan,IFR,SNRE,UM"
 },
 "supportsQueryDomains": true,
 "capabilities": "Map,Query,Data",
 "supportedQueryFormats": "JSON, geoJSON, PBF",
 "exportTilesAllowed": false,
 "referenceScale": 0.0,
 "datumTransformations": [
  {
   "geoTransforms": [
    {
     "wkid": 108001,
     "latestWkid": 1241,
     "transformForward": true,
     "name": "NAD_1927_To_NAD_1983_NADCON"
    }
   ]
  },
  {
   "geoTransforms": [
    {
     "wkid": 108001,
     "latestWkid": 1241,
     "transformForward": false,
     "name": "NAD_1927_To_NAD_1983_NADCON"
    }
   ]
  },
  {
   "geoTransforms": [
    {
     "wkid": 108190,
     "latestWkid": 108190,
     "transformForward": false,
     "name": "WGS_1984_(ITRF00)_To_NAD_1983"
    }
   ]
  },
  {
   "geoTransforms": [
    {
     "wkid": 108190,
     "latestWkid": 108190,
     "transformForward": true,
     "name": "WGS_1984_(ITRF00)_To_NAD_1983"
    }
   ]
  }
 ],
 "supportsDatumTransformation": true,
 "archivingInfo": {"supportsHistoricMoment": false},
 "supportsClipping": true,
 "supportsSpatialFilter": true,
 "supportsQueryDataElements": true,
 "maxRecordCount": 2000,
 "maxImageHeight": 4096,
 "maxImageWidth": 4096,
 "supportedExtensions": "",
 "resampling": false,
 "serviceItemId": "4623951d504047a093264a48643ff767"
}